Replacement boiler problems? - boiler replacement
Recently we have noticed that our furnace has begun (huge reservoir of copper), to oxidize and filter a little, so he bought new and installed by us.
The problem now is that we have no hot water pressure? We turn the taps and use a little slow to do something.
My husband has done and learned with all the rads, the air system, but still nothing.
It is very interesting, you can do something before? Have we forgotten something?
Thanks
Wednesday, January 20, 2010
Boiler Replacement Replacement Boiler Problems?
Subscribe to:
Post Comments (Atom)
4 comments:
Check the aerator at the ends of tap spouts. Change stirred tank until dirt and blocked.
Check the aerator at the ends of tap spouts. Change stirred tank until dirt and blocked.
We recommend that you put together a plumber! The copper tank to store hot water for domestic use and not related to water in the radiators that operate on a separate system, so that the bleeding has no effect.
The copper deposit on the size of the hot water bottle (not) in the boiler.
Its use for the storage of hot water and has a heat exchanger for central heating.
This is seen as a priority system, known under the pressure.
The pressure of hot water is regulated by the cylinder expansion tank (in the attic). Check filled with water and properly connected.
We hope that the scrapping of the old cylinders that are worth about € 20 - € 30) for scrap.
Your central heating should not affect the pressure of hot water.
Thus the bleeding rads would make no difference.
If the hot water tank, a cylinder with high pressure is more (modern), which is very dangerous to change yourself. By law, a qualification must be a heating engineer (UK) registered as if it might explode incorrectly connected.
Post a Comment